To Insert Batteries in Spotlight:
Using a Phillips/cross head screwdriver (not included),
loosen screw in battery compartment cover. Remove cover
(screw will stay attached). Remove and discard batteries.
Insert 2 x 1.5 “AAA” or R03 size batteries. Alkaline batteries
recommended. Replace door and tighten screw with
screwdriver. See diagrams for polarity.
2
Assembly:
Before beginning assembly, make certain you have all
of the pieces listed in the “Includes” list on page 1.
1
Connect Struts “A” to each other
using “B” Beams and Pivot. Make
sure holes on both Struts are
facing the same direction. See
image for Beam placement.
2
Connect Tower and Strut “B” using
“C” Beams and Trap Floor. Make sure
the bottom of the Strut is even with
the non-rotating end of the Tower.
See image for Beam placement.
3
C
C
4
C
C
A
A
A
A
A
A
B
B
3
Press “A” Beams into
“B” Strut and Tower.
See image for Beam
placement.
Pivot
