N-Strike LONGSHOT CS-6
™
To Assemble:
1. Insert Bolt into mechanism as shown
and plug onto other end of bolt.
2. Stock extends.
3. Slide/snap Sight onto Blaster. Lock
into place.
4. Insert grip and slide back to snap
into place.
5. Attach extension to main unit by
sliding extension into place...
6. ...and twisting 90 degrees to lock.
7. Bipod flips down.
8. Load Clip by inserting 1
STREAMLINE DART
™
at a time
and pushing down. Be sure to insert
darts in direction indicated on the
Clip. Each Clip can hold up to 6
STREAMLINE DARTS.
1. Pull Bolt Mechanism back. Ready Indicator should change
from black to red. Slide Clip into place.
2. Slide Bolt Mechanism forward.
3. Pull Trigger 2 to launch
STREAMLINE DART
™
.
4. Pull Bolt Mechanism all the way back,
and slide forward to load another dart.
5. To reload, pull Bolt Mechanism back and press Clip Locking
Button to remove Clip.
USING LONGSHOT CS-6
other side of blaster
Get user manuals:
