2. Attach baseboards to end panels
Parts
2 x pre-assembled end panel
2 x timber base board
8 x 50mm furniture bolt
The base board with the
double
black
plastic track is on the
front
of the
greenhouse. The ribs on the timber
face out.
The base board with the
single
black
plastic track is on the
back
.
Attach the timber base boards to the
end panels, using the furniture bolts.
Tighten well.
3. Fit the rear shelves
Parts
2 x 30mm aluminium shelf
4 x 20mm M5 bolt and nut
The rear shelves (without the irrigation
pipe) are fitted to the
bottom
of the
plastic blocks using a single bolt at the
end of each shelf.
The bolt goes down through the plastic
block, through the shelf and is secured
with a nut underneath the shelf.
