Harvia 1-027-775, Инструкция по установке и эксплуатации

Страница: 10 / 26

Installation instructions, only for experts p. 10/26
4. Installation and connection
Take the following points into account when positioning and connecting the sauna
heater:
,IWKHUHLVVXI¿FLHQWYHQWLODWLRQWKH&RQFHSW5VDXQDKHDWHUFDQDOVREH
VHWXSDVDIUHHVWDQGLQJGHYLFH,QWKLVFDVH¿WWKHWHPSHUDWXUHVHQVRU
to the cabin roof above the centre of the heater.
Ɣ 7KHHOHFWULFDOFRQQHFWLRQPD\RQO\EHSHUIRUPHGE\DTXDOL¿HGHOHFWULFLDQRU
VLPLODUO\TXDOL¿HGSHUVRQ
Ɣ A fully disconnecting all-pole isolating device compliant with overvoltage
FDWHJRU\,,,PXVWEH¿WWHGRQVLWH
Ɣ The Concept R combi sauna heater is a free-standing heater. It does not need
WREHDWWDFKHGWRWKHÀRRURUVDXQDZDOO
Ɣ 'RQRWSODFHWKHVDXQDKHDWHURQDÀRRUPDGHIURPDQHDVLO\ÀDPPDEOH
PDWHULDOVXFKDVZRRGRUSODVWLF6XLWDEOHÀRRULQJLQFOXGHVFHUDPLFWLOHVIRU
example.
4.1. Installation location and sensor position
Position the heater centrally in front of the air intake opening in the cabin wall.
2EVHUYHWKHVDIHW\GLVWDQFHVWRWKHFDELQZDOOVSHFL¿HGLQ Fig. 1 .
Install the temperature sensor with excess temperature cut-out to the cabin wall
above the centre of the sauna heater. Maintain a distance of 15 cm to the sauna
cabin roof.
WARNING!
Danger of electric shock
Ɣ The sauna heater may only be installed and connected when the
power supply is disconnected.