HARVEY C300-30, Руководство по эксплуатации, Страница: 5 / 36

2
3. Machine Description
3.1 Technical Parameters
Item C300-30 C300-50
Product dimensions
Net Weight 488Ibs (221.5 Kg) 530Ibs (240 Kg)
Length/width/height
66×44×40"
1582x1100x1016 mm
86×44×40"
2090x1100x1016 mm
Foot print(length/width) 20×20" (500 x 508 mm)
Electrical
Switch
magnetic with thermal overload protection
Motor
Type TEFC capacitor start induction
Horsepower/voltage/phase 3HP (2.2 kW)-230V-1PH
Speed/cycle 3450 RPM/60Hz (2850 RPM/50Hz)
Power transfer V-belt Drive
Blade information
Maximum blade diameter 10" (254 mm)
Riving knife/spreader thickness 0.1" (2.5 mm)
Required blade body thickness 0.071-0.094" (1.8-2.4 mm)
Required blade kerf thickness 0.102-0.126" (2.6-3.2 mm)
Maximum width of Dado 13/16" (20.6 mm)
Blade tilt left 0-45°
Arbor size 5/8" (15.875 mm)
Arbor speed 4300 RPM
Arbor bearings sealed and permanently lubricated
Cutting capacities
Maximum depth of cut at 90° 3-1/8" (79.4 mm)
Maximum depth of cut at 45° 2-3/16" (55.5 mm)
Maximum rip to right of
Blade-standard 30" (762 mm) 50" (1270 mm)
Maximum rip to left of blade 12" (305 mm)
Table information
Floor to table height 34" (860 mm)
Main table--length/width/thickness 20×27×1-1/2" (512x685x48 mm)
Distance from the front edge of
table to center of blade 17-1/4" (440 mm)
Distance from the front edge of
table to blade of maximum cut 12-1/4" (310 mm)
Fence information
High fence plate size 3-27/64×39-3/8" (87x1000 mm)
Low fence plate size 1/2×39-3/8" (12.7x1000 mm)
Miter gauge
information
Miter gauge slot type T-slot
Miter gauge slot type-- width/height 3/4×3/8" (19.05 x 9.525 mm)
Other information
Paint power coated
Dust port size 4" (100 mm)