HARVEY Axminster AT254LTS, Оригинальное руководство пользователя

Страница: 15 / 56

Assembly/Setup
15
59
58
57
56
63
62
61
60
Locate the rip-fence scale tape (Y) and place it on top of
the fence rail (S). Remove the crown guard (B), position the
rip-fence assembly (R) against the blade and lock in place.
Note: make sure the fence is in the upright position.
Line up the ‘Zero’ on the scale (Y) with the scale marker on the
fence assembly (R). Using a pen mark the position of the tape.
Remove the fence assembly and place to one side. Peel off the
backing from the tape (Y) and carefully press down using a
cloth onto the rip-fence rail (S). Make sure there are no ripples
along the length of the tape. Using scissors cut off the excess
so it’s flush to the end of the fence rail.
X
Adjust until level
P
H
Lock nut
V3
Mark the postion
of the tape
Scale marker
Y
S
O
N
Continues over...