background image

3.2 Transportation Procedure 

 _

Move auger with a tractor only. Never attempt to move by hand.

Under no condition should you allow riders on the auger or tractor.

Transport the auger no faster than 15 mph. When roads are rough or surfaces 
are uneven, slow down to ensure safe travel. 

DANGER:
Do not transport the auger on slopes greater than 20 degrees. This could 
cause the auger to tip, resulting in damage to the auger, and personal 
injury or death. 

When visibility is reduced, please use caution and add extra lights to the auger. 
Consider using a pilot vehicle for safer travel.

Use extreme caution when turning or cornering with the auger in tow.

Check regulations with local authorities regarding auger transportation. Follow 
all over-width regulations. Equip auger with all necessary lighting, and use 
hazard warning flashers on your tractor, when required by law. 

3.3 Placement of Auger 

 _

Before raising or lowering your auger, check that the area is clear of 
obstructions, children and unauthorized personnel. 

DANGER:
Electrocution Hazard! Make sure that all unauthorized personnel are clear 
from the transport zone. This auger is not insulated. Be alert to overhead 
obstructions and electrical wires. Electrocution can occur without direct 
contact. Do not raise or lower auger until hazardous area is cleared. Failure 
to maintain proper clearance can result in serious injury or death.

Ensure that your auger is on level ground that is free of debris.

DANGER:
If ground is very uneven, auger can tip and cause damage to the 
equipment and personal injury or death.

8

Содержание H1384XT










































Отзывы: