Harvest TEC 890A, Руководство пользователя

Страница: 3 / 18

3
INTRODUCTION
Congratulations on purchasing a Harvest Tec Model 890A Scale Interface & GPS Attachment
Kit. This kit provides you with the ability to record yield mapping files onto a USB flash drive
along with writing the exact bale weight into your job records. The kit will also write the rolling
average from the last three bales weighed by the AGCO scale kit on the baler to the tag if
your baler is equipped with a Harvest Tec Model 850 Tagger (U.S. Patent 7,621,111B2 & U.S.
Patent 7,415,924B2). The 890A will only work with AGCO balers with the AGCO scale kit
installed. The yield mapping portion of the kit will only work if you plug a Garmin 16X HVS into
the Interface box. For this kit to function at all your baler must have the Harvest Tec Model
500 Moisture Monitor or Harvest Tec model 565 Preservative Application System installed on
it.
OVERVIEW
There are two parts to the Harvest Tec Model 890A Precision Information Processor (PIP)
Interface Control & GPS Attachment Kit. The PIP Interface portion is designed to monitor the
bale scale CAN communication and intercept the signal when it is transmitted. As this weight
is captured it is immediately stored into the job records for that specific bale. If your baler is
equipped with a Tagger, as the signal is intercepted the 890A will use the data collected from
the last three bales and write rolling averages to the tags. The data will then be readable
using a Harvest Tec Model 860 Scanner. The GPS attachment portion is designed to interface
the Garmin 16X HVS into the 565/500 system and have it collect GPS points to be processed.
With this processed data the PIP will create and store a yield files, save in a CSV format, onto
the USB flash drive.