Harvest Healthcare SALISBURY HS310, Руководство пользователя, Страница: 16 / 32

T
+44 (0)1709 377172
F
+44 (0)1709 377173
16
OPERATION
INFLATING THE MATTRESS
Press the power On/Off switch to the On position: the switch should illuminate to
show it has a power supply.
The low pressure warning light will now illuminate to indicate that the mattress is being
inflated. Once the mattress is up to the correct pressure, the low pressure warning
light will go off.
The mattress is now ready to be used.
1
2
Set the pump to run at the correct pressure to suit the weight of the
service user. Refer to the Pump Control Panel guide located on the
front of the pump.
DEFLATING THE MATTRESS / CPR VALVE & SWITCHING OFF THE SYSTEM
To deflate the mattress, simply open the CPR
valve and disconnect the pump from the
mattress using the quick release connector.
If rapid deflation is required, simply twist the CPR to the OPEN
position.
If the pump needs to be disconnected for any reason, the two ends of the feed tube pipes
can be connected. This will prevent deflation, retaining that the air within the mattress.
The alternating action stops in this mode.
TRANSPORT MODE
To turn off the system; press the power button to OFF and unplug
from the mains supply.