7
5
6
Carry out the transfer ensuring that the
hoist is not drag lifting the client. To reduce
this risk ensure that the client leans back
into the sling.
The additional belt with buckle can be
closed. This belt can be adjusted by pulling
the end of the strap.
Attach clip to the spreader bar stud, ensure
that the clip clicks in to place and is secure.
To ensure safe use, place the large hole of
the clip over the hoist bar stud, pull down on
the clip until it clicks into the narrower neck
area. Ensure that the clip cannot be pulled
from the bar. To remove the clip, pull the
small strap up fully until the large hole is
located over the stud. Failure to fully lift the
clip over the stud when removing can
damage the clip retainer prongs.
More information -
www.harvesthealthcare.co.uk
