Harvest Healthcare HARVEST 3 PUMP, Общее руководство пользователя / Руководство по безопасности, Страница: 14 / 28

T +44 (0)1709 377172 F +44 (0)1709 377173
14
OPERATION
INFLATING THE MATTRESS/CUSHION
Plug in at the mains supply, press the ON button on the side of the pump and then
on the control panel. The control panel will light up to indicate that there is a power
supply.
The pump is in start up mode. Once the mattress is fully inflated it will be ready to use.
While in start up mode do not select static mode. This will cause the pump to
alarm. If the pump alarms, switch off the pump and switch it back on to reinflate the
mattress.
The mattress is now ready to be used.
1
2
Set the pump to run at the correct pressure to suit the weight of the
service user. Refer to the Pump Control Panel guide on the front of
the pump.
If the pump needs to be disconnected for any reason attach the transport cap to the feed
tubes connector. This will prevent deflation retaining the remaining air within the mattress.
The alternating action stops in this mode.
TRANSPORT MODE
To turn off the system press the power button to OFF and unplug from
the mains supply.
When the mattress is fully inflated set the pump to the approximate weight of the
service user. Position the service user in the lying position. If required adjust the weight
setting to meet the patient’s comfort needs.
Ensure that the comfort setting is altered correctly when the patient moves from a lying
to a sitting position and vice versa. This can be done using the ‘Seat Inflate’ button.
The pump will increase the pressure by 5mmHg while this mode is activated. This
function helps give the user extra support when the bed is profiled. No other settings
need to be altered, either when in use or after deactivation
NOTE: The static mode is only to be used for patient care. Switch off after use.
1
2
SETTING UP PROCEDURE
It is important to follow the correct setting up procedure to ensure the patient receives
sufficient support whilst achieving maximum pressure relief and comfort.
Failure to follow this procedure could result in the patient being put at risk.