1.
PRODUCT INFORMATION
This product has been developed from Western Harver
Technology and also using new temperature sensing technology.
These units are tested to CE specification and all local SANS &
NRCS requirements have been installed and passed.
The unit is split into two parts, the storage tank and the
generator unit.
The process of heating the water uses magnetic induction, which
heats the water more rapidly than conventional water heaters.
The electrical supply to the generator is converted into a
magnetic energy that then causes a resistance field which in
turn heats the water. This means that there is no direct electrical
a/c current in close proximity to the water, making it safer.
The unit uses new temperature sensing technology that is more
accurate. There is a high density thermal insulation layer, to
sustain the water temperature.
All these processes increase the efficiency and therefore save
electricity.
There are several protection systems in place such as: dry burn,
over heat, low/ high voltage, surge and over heat protection.
PLEASE NOTE – THIS UNIT IS NOT AN INSTANTANEOUS WATER
HEATER
Page 2
