16
H
a
r
v
a
rd
A
p
p
a
ra
tu
s
N
L
S
1
1
0
P
P
re
s
s
u
re
P
u
m
p
Publication 5422-001-REV-A
Hardware/Software Installation (Cont)
23.When its done click finish
24. Repeat the found hardware installation for the second pump-head
25. Open
USBAPP.EXE
, which can be found in the main folder or by navigating
through the CD
26. Click on
Application .exe
27.The application window should appear
28. On the application.exe click on the dropdown box of port1 (required)
29. You should see a list of com ports, two of these com ports should have
consecutive numbers
30. Select the lower numbered com port (between the two consecutive ports)
31. Click on the dropdown box of port2 (optional)
32. Select the higher numbered com port (between the two consecutive ports)
33. Change # of attached channels to 2 (Only if you are using both pump heads)
