Haruman's Customs Nintendo Bartop, Руководство по сборке

Страница: 10 / 10

Once the glue has dried overnight, remove the weight and remove the side that wasn’t glued.
Place that side down on a flat surface, slots facing up, and add glue into the slots. Carefully turn
over the glued side / panels assembly and insert the tabs into the correct slots, press down, add
a weight, and wipe up any excess glue. Also insert the remaining batons. Let dry overnight.
Monitor mounting:
Once the cabinet is dry, you can complete the monitor mounting. Use the supplied monitor
panel to attach to your LCD monitor using M4-.07 machine screws (25mm length). Washers
may be needed here. Once this is attached, you can place the monitor and panel into the
cabinet to determine where to place the monitor. Once monitor is placed, use the included
triangular metal brackets to attach the panel to the sides of the cabinet (drill & ½” wood screws
needed).
* NOTE : The included screws with the brackets are a little too long and will poke out of the
cabinet if you use them as is. You either need shorter screws or use some spacers (like
washers).