Hartmann DC3-18, Инструкция по эксплуатации

Страница: 25 / 152

25
English
EN
■ ■
If the symbols or appear on the display, the ambient temperature was
too high or too low during the measurement, which can lead to abnormal
blood pressure values. In these cases, please follow the 10 golden rules
(see Chapter 5.1) and repeat the measurement under optimal temperature
conditions.
■ ■
In addition to the measured values, the time, the date, the associated user
memory or and the corresponding memory number (e.g. [M] 05) are
shown. The measured value is automatically assigned to the displayed user
memory. As long as the measurement is displayed, you can allocate the values
to the corresponding user memory by pressing the or keys. If you do not
assign them, the measured value is automatically stored in the displayed user
memory.
■ ■
You can classify your measured values using the results indicator on the left of
the display (see the table in Chapter 3 ‘Blood pressure information’).
■ ■
To switch the device off, press the START/STOP button ; otherwise, the
device will automatically switch off after 3 minutes.
■ ■
The measurement will not be saved if the power supply is interrupted before
the device is switched off.
If you wish to stop the measurement process for any reason while taking
your blood pressure, simply press the START/STOP button . The cuff
inflation or measurement process is interrupted and the pressure is
automatically released.
■ ■
If this symbol is shown at the bottom of the display, the unit has detected
an irregular heartbeat or arrhythmia. However, the measurement may also
have been disrupted by body movement or speaking. It is best to repeat the
measurement. If you see this symbol regularly when measuring your blood
pressure, we recommend that your doctor checks your heart rhythm.
Operating in guest mode
If Veroval ® duo control is used by a third person, it is recommended to use the
guest mode. This mode ensures that a measured value is not saved to either of
the two memory positions ( or ).
This prevents distortion of the series of measurements and the average values of
the two main users of the device.
IFU_Veroval_dc_SK6_0307662_2020-02-10.indd 25 27.02.20 13:08