HARTMANN TRESORE
14
Digit “2” – private mode
* (3) Confirm the second number group with “close”.
The third number group (date) appears and can be changed.
* (4) Confirm the third number group with “close”.
The fourth number group (time) appears and can be changed:
Here again, confirm with “close” to finish and exit programming.
Reprogramming the master code
• While the door is open, enter
“clear clear”
.
“PROG’’
is shown in the display.
As soon as the display goes out, the current master code (
see chapter 3
) must be entered.
“NEW”
appears in the display.
• Enter a new 6-digit master code within 15 seconds.
“AGAIN”
appears in the display.
• Repeat the new 6-digit code within 15 seconds.
“DONE’’
appears in the display.
The master code has been successfully changed.
PLEASE NOTE:
The master code cannot be reprogrammed if the current master code is not known.
Programming the master card (in hotel mode only)
• While the door is open, hold the
“S”
card against the sensor.
“IN”
appears in the display.
• Hold the
“M”
card against the sensor continuously for 8 seconds.
The following appears in the display:
“CARD *”
(“
*
” represents a number from 1 to 10 that
stands for the card number in question).
• A maximum of 10 master cards can be programmed for each safe.
• If an error occurs during programming, the message
“Error”
appears in the display.
Please note: As soon as a master card is programmed, the master code function is deactivated.
Deleting the master card (in hotel mode only)
• While the door is open, enter
“clear clear 9360 close”
.
“S-CARD’’
appears in the display.
• Hold the
“S”
card against the sensor.
•
“Delete”
appears in the display. All master cards have now been deleted.
Display
0
A
B
C
6
0
2
0
4
Display
1
A
B
C
4
2
5
3
6
A/B/C stands for day/month/year. Here, the example is “6 February 2004”.
A/B/C stands for hour/minute/second. Here, the example is “14:25:36”.
!
