Harsper HL-401B, Руководство пользователя

Страница: 7 / 57

6
Precaution
OWNER'S MANUAL
Provide ventilation for the monitor. The unit is designed
with slots in the cabinet for ventilation to protect it from
overheating. Do not block these openings with any
object, and do not place the monitor on a bed, sofa,
rug or other similar surface. Do not place it near a
radiator or heat register. If you place the monitor on a
rack or bookcase, ensure that there is adequate
ventilation and that you've followed the manufacturer's
instructions for mounting.
Use only the accessory cord designed for this product
to prevent shock. The power supply voltage rating of
this product is AC100-240V, the power cord attached
conforms to the following power supply voltage.
Use only the power cord designated by our dealer to
ensure Safety and EMC.
When it is used by other power supply voltage, power
cable must be changed. Consult your product dealer.
Use only a grounded or polarized outlet. For your safety,
this Monitor is equipped with a polarized alternating
current line plug having one blade wider than the other.
This plug will fit into the power outlet only one way.
If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug still does not fit,
contact your electrician to replace your outlet.
Avoid overhead power lines. An outside antenna
system should not be placed in the vicinity of
overhead power lines or other electric light or power
circuits or where it can fall into such power lines or
circuits. When installing an outside antenna system,
be extremely careful to keep from touching the
power lines or circuits. Contact with such lines can
be fatal.
Unplug the monitor from the wall outlet and disconnect
the antenna or cable system during a lightning storm
or when left unattended and unused for long periods
of time. This will prevent damage to the unit due to
lightning and power-line surges. Protect the power cord. Power supply cords should be
routed so that they won't be walked on or pinched by
objects placed on or against them.
Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.