![background image](http://html1.mh-extra.com/html/harry-taylor/ht2000/ht2000_installation-service-and-user-manual_4014148005.webp)
5
BS EN 60204 - Part 1 : 1993
Safety of Machinery - Electrical Equipment
for Machines Specification for General
Requirements
BS EN 60335 - Part 1 : 1988
Safety of Household and Similar Electrical
Appliances General Requirements
BS EN 55014 - 1993
Limits and methods of measurement of
radio disturbance characteristics of electrical
motor-operated and thermal appliances for
household and similar purposes, electrical
tools and similar electric apparatus
BS EN 50165 - 1997
Electrical Equipment of non-electric heating
appliances for household and similar
purposes, safety requirements
The Harry Taylor Ltd PV range of gas unit
heaters meet with the governments criteria
in respect of the Enhanced Capital
Allowance Scheme
1.1 Certificates of conformity
Declarations and Certificates are available
upon request from the Quality Control
Department at Harry Taylor Ltd
1.2 General product information
The Harry Taylor Ltd PV Range of 6 model
sizes have outputs from
29.4
to
144.0
kW,
PV heaters are suitable for operation on
Natural gas (G20) or LPG (Propane G31)
The Model Range is made up as follows
and are available in a configuration that will
allow for floor mounting only.
PV heaters have been approved for
alternative flue discharge arrangements but
each heater must be connected to its own
individual open flue these are detailed in
following page’s
Cabinet
Manufactured from electro-zinc coated steel,
finished in a durable stove enamelled
polyester powder paint.
Heat Exchanger
Manufactured from aluminised dimpled steel
tube formed into a W shape to give
enhanced efficiency .
Flue / Combustion Air Spigot
Each heater is fitted with two spigots both of
which are located on top of the appliance.
One of the pair is for connection for the flue
whilst the other is a screened combustion air
intake
SEE SECTION 2.4 FLUE
INSTALLATION
Burner
The induced draught multi in-shot burner
assembly is manufactured from aluzinc
coated steel and mounted to a common
steel manifold which can be easily
withdrawn through the burner access
compartment.
Burner Control
The heaters are fitted with automatic
ignition for all models within the range.
Exhaust Fan
Combustion gases are evacuated to
atmosphere via an in built power flue venter
fan which is safety interlocked to the gas
valve via an air pressure proving device
Air Movement Fan
PV heaters are supplied with Centrifugal
fans suitable for ducted or free blowing
applications
Note
Neither asbestos nor soft soldered joints are
used in the construction or manufacture of
the Harry Taylor Ltd range of Heaters.
Model No
30
50
72
Output kW
29.4
49.0
72.0
Model No
95
120
145
Output kW
96.0
120.0
144.0
Содержание HT2000
Страница 51: ...51 Notes...