VOL-046/047
Floor Fixed Volleyball Posts
1
Using the pack contents list overleaf, identify the parts required to assemble
the volleyball Posts purchased.
2
Using the M12 Button Head Screw (3) and Washer (4), anchor the base of
the volleyball posts to the ground securing with an Allen Key.
3
Insert the post into the spigot on the base push the button clip in and locate in
the hole on the spigot until the clip engages and fully emerges through.
; upright is universal, spring clip may need relocating in opposite
side of upright in order to orientate the upright correctly in the base.
Please note
SH2 Socket Installation (Optional Extra):
The sockets should be installed by a specialist, using the following guidelines,
please contact your distributor for recommended specialist fitting engineers.
Mark at location shown in Fig 2. Drill
20mm holes 160mm deep from floor
level for standard SH2 sockets for solid floors or 210mm deep for longer SH2
socket for sprung floors.
Ø
Code:
Product:
Assembly Instructions
Post Assembly
