Harrod SHE-011, Инструкция по эксплуатации

Страница: 1 / 7

SHE-011/016/021/026/031/036/041/046
Premier Socketed Curved Team Shelter
INS206
Revision 3
16/11/15
Harrod UK Limited ©
Code:
Product:
Pack Contents:
IMPORTANT NOTES
At least THREE people are required to safely assemble
this shelter.
This shelter must be assembled on a flat surface.
Failure to do this may result in bolt hole misalignment.
If the shelter is to be bolted into concrete, there should
be at least 100kg of concrete at each anchor point (Eg:
350x350x350mm Cube).
WHEN THE SHELTER IS FULLY ASSEMBLED IT MUST
BE ANCHORED TO PREVENT MOVEMENT AND
TOPPLING. PLEASE SEE YOUR DISTRIBUTOR FOR
ANCHORING OPTIONS.
1.
2. 1 x L/H SIDE FRAME (
1 x R/H SIDE FRAME (
3.
4.
5.
6.
7.
8.
9.
BENT SUPPORTS (
1 x Bent Supports (PEQ049)
BUCKET SEATS (Pair) (
A-3 Stadium Seat (Red) (PLA049)
A-3 Stadium Seat (Blue) (PLA044)
A-3 Stadium Seat (Green) (PLA043)
1 x CROSSBAR & BACK BAR (4M) (
1 x CROSSBAR & BACK BAR (5M) (
1 x CROSSBAR & BACK BAR (6M) (
1 x Backbar
1 x Crossbar
2 x Retaining bar
RETAINING TUBES (
Retaining Tube (PEQ078)
PET BACK SHEET (
FEP038)
FEP037)
FEP049)
FEP045/046)
FEP044)
FEP041)
FEP040)
FEP047)
PLA047)
1 x SEAT SUPPORT FRAME (4M) (FEP053)
1 x SEAT SUPPORT FRAME (5M) (FEP055)
1 x SEAT SUPPORT FRAME (6M) (FEP057)
Seat Support (PEQ044)
. End Support (PEQ052)
BACK SUPPORTS (4/6M) (FEP079)
1 x BACK SUPPORTS) (5M) (FEP077)
950mm Back Support (PEQ079)
FEP054)
FEP058)
FEP056)
FPK040)
FPK041)
FPK042)
(Packed with Seat Support Frames)
30. Aluminium Team Shelter Sockets (FEQ794)
10.
11
12.
13. 1 x SEAT SUPPORT (4M) (
1 x SEAT SUPPORT (5M) (
1 x SEAT SUPPORT (6M) (
1 x BOLTS PACK (4M) (
1 x BOLTS PACK (5M) (
1 x BOLTS PACK (6M) (
Page 1
TOOLS REQUIRED
1 x T-Handle Nut Driver (included)
2 x 13mm Spanners
1 x Phillips HD Screw Driver/Drill Bit
Silicone Lubricant Spray/Fairy Liquid
1 x Mallet
3mm 1 x Rachet with 1 socket
Please read these assembly instructions
carefully before starting to assemble
your shelter.
General Info
4m Shelter 5m Shelter 6m Shelter Part No.
14. M8 Nutcap 4 4 4 (CAP951)
15. 32mm Cover Cap (Top) 3 4 5 (CAP096)
16. 32mm Cover Cap (Bottom) 3 4 5 (CAP097)
17. M8 Hex Nut 4 4 4 (BOL400)
18. M8 Nyloc Nut 39 48 57 (BOL402)
19. M8 Washer STST 9 12 15 (BOL715)
20. M8 Skiffy Washer 48 56 64 (BOL722)
21. M8 * 20 Set Screw S/S 4 4 4 (BOL546)
22. M8 * 80 Hex Bolt S/S 30 36 42 (BOL472)
23. M8 * 40 Hex HD Bolt S/S 6 8 10 (BOL520)
24. M8 * 90 Hex Bolt S/S 3 4 5 (BOL450)
25. 14G 60mm Self Tapping Screw 8 10 12 (BOL771)
26. 16mm Round Insert 5 6 7 (CAP095)
27. Crossbar Cap 2 2 2 (PEP050)
28. 10G * ½” Self Tapping Screw 4 4 4 (BOL782)
29. 10mm T-Handle Nut Driver 1 1 1 (FAS005)