This product is protected by © Copyright
and Design Right Harrod UK Ltd 2010.
Page 4
Fig 5
HAN-010
Aluminium Competition Handball Posts
Code:
Product:
Folding The Sideframe
Fitting the Net
(sold separately)
- Locate the Crossbar edge of the Net (identified with a label). Attach the Net Hooks to the
Crossbar and Upright edges then insert & lock the Hooks into the recess. Fit the Net Hooks to the Red areas on the Goal (The
hooks may damage the white bands when twisted)
Slot the edge of the net into the cut-outs in the top and bottom hinge bracket.
Ensure that the net is situated within the Sideframe then fit an
Elastic with Loop to each corner of the Net by threading it back
onto itself (Refer to Fig.7). Fix to the lugs on the Sideframe and
place another Elastic Loop at
the position of the Curtain Net
(fitted to Competition Net
HAN-005).
A minimum of 2 People are required to safely fold and move this Goal
To fold the Sideframe, first remove the backbar by depressing the button clip then slide the backbar out (see Step 3). Then pull
the plunger knob down to un-lock the Sideframe (see Step 2). Fold the Sideframe and release the plunger to lock.
This goal must be secured against overturning
at all times
Anchoring the Goal
(even when not in use)
- Secure the goal by
inserting the Handwheels supplied through the
hole in the Sideframe and screwing into the floor
socket, see Fig 5.
The handwheel has a nut pre-fitted; in normal
circumstances this can be left in place. Where the
thread in the ground socket is lower than ground
level, remove this nut to provide more thread to
screw into the floor socket.
Anchoring The Goal
Fitting The Net
Fig 6
Fig 7
Remove Nut, if
required.
