Code
Product
FBL-699
3G Weighted UEFA Portagoal
7
Slide three M10 Square Screws into the channel in each Net Support (8). From the covered
end of the Net Support, slide one M10 Square Screw around a third of the way down and
position the remaining two near the plate. Affix the M10 Spacer (F) to the Strap Bracket (B) using
an M10x40mm Button Screw (H). Place the Strap Bracket assembly over the M10 Square Screw
placed a third of the way down the Net Support and fix in place with an M10 Handwheel (E). To
move the bracket, loosen the handwheel and slide along the section, tighten to fix the position.
Place the Top Bracket (C) over the two M10 Square Screws near the top of the Net Support and fix
in place using two M10 Nyloc Nuts and two M10 Washers.
Page 8
M
C
L
J
8
H
F
B
E
J
8
8
17mm
6mm
8
Place the Net Supports in the Net Support Brackets in the rear of the goal.
8
