SEL-MDX1
Installation and Operation Manual
26
Copyright © 2011, Harris Corporation
ECMG
Sub CAS ID
Use this field to set the sub CA system ID of the Conditional Access System. Must be unique
for each ECMG.
Multiplexer
This parameter sets the index of the multiplexer function associated with the Simulcrypt
conditional access ECM generator. A value of
0
indicates this
ECM
generator is inactive.
EMMG
Multiplexer
Specifies the index of the multiplexer function associated with this EMM Generator. A value
of
0
indicates this EMMG is inactive.
Protocol
Connections are always
TCP
but data transfer can be
TCP
or
UDP
. This setting must be
coordinated with the same setting on the Conditional Access System itself.
Max EMM Data Rate
This control sets the maximum bandwidth to be consumed by EMMs on the transport. This
bandwidth must be taken into account when allocating the rate on programs and other
data on the interface.
CAT Descriptor
MPEG descriptors to be inserted directly into the conditional access table (CAT). They are
formatted as colon (:) separated two digit hexadecimal characters. The user is responsible
for making sure the descriptor is valid and well formed.
Access Criteria
Value
When the vendor field is set to
Generic
, this provides a method to set the access criteria
specific to a conditional access system.