Harris NEXIO AMP NX3801HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 80 / 140

Chapter 4
Using NEXIO Config
70
©2011 Harris Corporation. All rights reserved.
Channel
Configuration
The NEXIO Config Channel Configuration window ( Figure 4-12 ) allows you to
select the channel type and select options.
The back panel graphic shown below appears different than the actual hardware.
Figure 4-12 NEXIO Config — Channel Configuration
If a value appears in a box that is grayed out, the value is valid but cannot be
edited. In addition, if a check box is selected and is grayed out, the option is
enabled and cannot be disabled from this window.
To select a configuration and include or exclude options
1 In the Channel Type list, select the configuration for your system.
2 In the Record/Bi-directional Channels list, select the number of record or
bi-directions channels.