Harris HMX6803+, Инструкция по установке и эксплуатации

Страница: 42 / 108

26 HMX6803
+
and OP
+
HMX
+
Installation and Operation Manual
Copyright © 2009, Harris Corporation
Chapter 3: Operation
Activating HMX6803
+
and OP
+
HMX
+
Functions
The following sections provide information about the HMX6803
+
and
OP
+
HMX
+
special functions:
• “Adding a License Key” on page 26
• “Audio Test Tones” on page 27
• “Audio Embedding Modes” on page 27
• “Audio Embedding Errors” on page 31
• “Input Audio Rate” on page 33
• “Audio Path” on page 34
• “Seamless Sound Function” on page 34
• “Test Pattern Generator” on page 36
• “Dolby-E Automatic Header Alignment” on page 36
• “Audio Delay Ranges” on page 36
• “Maintaining Audio/Video Alignment” on page 36
Adding a License Key
Note
For assistance with a license key, or to purchase a license key, please
contact your Sales representative.
To enter a license key to activate AES audio and/or 3G HD video, your CCS
software must be in Control mode.
1. Select the HMX6803
+
module in the Navigation pane, right click, and then
select Control to open the module’s Control window.
2. Select the Parameters tab.
3. Select General in the tree view, and then type your license key in the
License Key field.
HMX6803
+
and OP
+
HMX
+
modules appear as HMX6803
+
modules in
Navigator.
If your license key is valid, the Installed Options field displays the features
that are activated on the module, which in this case is 3G and/or AES .