Harris FERVA SATURN, Инструкция по установке и эксплуатации

Страница: 22 / 24

22
Operating Instructions for the
Thermoelectric Generator (TEG)
Your TEG is designed to automatically turn on when the fire is in use and will auto-
matically turn off once the fire has cooled down. There is no on/off switch.
The fan has 2 settings.
(I) Low or quiet setting (switch down)
(II) High setting (switch up)
Adjust the fan speed to suit your needs. The high setting should be used to distrib-
ute the heat quicker and the low setting to be used once the room is up to temper-
ature or you desire the quiet setting.
The LED light indicates when the unit is generating power.
When you light the fire, it will take approximately 15 to 20 minutes until the fan is
operational. The LED light will come on some time before the fan has started. The
fan may run for some time after the fire has gone out.
Your TEG does not require any maintenance, but the fire will require normal
maintenance as illustrated in this manual.
The USB socket can be used to charge cell phones and other portable USB devices.
It supplies 5VDC @500mA. Only connect one device at a time.
IMPORTANT
It is very important that the rear fire bricks in the bottom chamber remain in place.
If removed, the TEG may be damaged from overheating. Cracks in the rear bricks
are totally acceptable as long as they remain in place. If your rear bricks are se-
verely damaged and can no longer remain in place, they should be replaced before
using the fire.
Because the TEG is a low voltage system, there is no risk of electrocution
from the appliance. DC devices are considered very safe.