7
WARNINGS - READ
Read all instructions before operating the Harris e-Core.
• The Harris e-Core is to be used only in a laboratory by trained professionals.
• The Harris e-Core is not a medical device, do not use to sample living tissue.
• Do not operate the Harris e-Core near sinks, running water, spills, or wet surfaces.
• Do not immerse the Harris e-Core in water.
• Unplug the Harris e-Core in the event of malfunction.
Observe the following precautions when handling the power supply.
• Do not place the Harris e-Core plug or cord near or in water.
• Do not put strain on the cord. Ensure the Harris e-Core is operated with adequate extra cord length.
The use of grounded extension cords is acceptable.
• Keep dry. Failure to observe this precaution could result in fire or electric shock.
• Do not handle the plug with wet hands. Failure to observe this precaution could result in electric shock.
• Do not modify the plug in any way.
• Dust on or near metal parts of the plug should be removed with a dry cloth. Continued use could result in fire.
Unplug the device before dusting.
• Unplug the power supply during thunderstorms. Do not handle the power cable or go near the adapter
during thunderstorms. Failure to observe this precaution could result in electric shock.
• Do not damage, modify, forcibly tug or bend the power cable. Do not place the power cable under heavy objects,
or expose it to heat or flame. Should the insulation be damaged and the wires become exposed, contact your
distributor. Failure to observe these precautions could result in fire or electric shock.
• Ensure that the optional plug sets are completely seated in the main plug base.
• Use only plug adapters designed for use with this product.
• Do not allow the cord to hang over the side of a bench or other working surface.
• Do not operate the Harris e-Core with a damaged cord or plug.
• Use care when changing plugs on power supply. Removing a plug from power supply may require additional effort.
To assist this removal it is suggested that you cover the prongs on the plug to be removed with a cloth or use gloves
when prying plug from power supply sleeve. (See Section 6.0)
• Do not operate the Harris e-Core with a damaged cord or plug or if the Harris e-Core malfunctions, or is
dropped or damaged in any manner. Turn off immediately and contact the distributor for assistance.
• Should you notice smoke or an unusual smell coming from the Harris e-Core, unplug the power supply immediately.
Continued operation could result in injury. Contact the distributor.
• Always unplug the Harris e-Core before replacing with dedicated Harris Micro-Punch Tips, when it is not in use and
before cleaning.
• Keep free hand away from coring zone.
• Unplug the unit to change coring tips (See Section 5.0). Make sure the tip cover cap is on at all times when the Harris
e-Core is not in use.
• Do not disassemble the Harris e-Core.
• Touching the internal parts of the Harris e-Core or power supply could result in injury. If repairs or servicing is required
contact the distributor.
• Never keep the Harris e-Core with the Harris Micro-Punch Tip rotating in contact with the substrate for
more than 3
seconds as it can cause permanent damage to the motor.
If the motor stops working, unplug the power supply and let
the motor cool for a few hours before attempting to use it again. If the motor continues to be inoperable then contact the
distributor for assistance.
• To reduce the risk of injury, never activate the Harris e-Core coring tip unless the Harris e-Core is to be used to core a
sample from a substrate.
• Always use the Harris e-Core on a clean, flat, dry Harris Cutting Mat.
• The use of Harris Micro-Punch Tips not designed for the respective model of Harris e-Core or the use of attachments not
recommended by the manufacturer may damage the Harris e-Core, may cause injury to the user and will void the warranty.
• Be certain that the Harris Micro-Punch Tip is completely and firmly attached onto the Harris e-Core drive shaft thread.
• Do not depress Harris e-Core plunger ejection rod when preparing to core a sample. The Harris e-Core is not a
punch and the plunger is not a punching mechanism.