Harris CZ1000F, Руководство по вводу в эксплуатацию

Страница: 18 / 162

1-2 888-2685-001 12/24/07
WARNING: Disconnect primary power prior to servicing.
Section 1 Introduction
Ranger Commissioning Manual
1.2 Ranger Transmitter Models
The Ranger Series™ transmitter utilizing FLO
TM
technology is available in 2 power levels as
listed in Table 1-1.Both systems are designed to use external (low loss) mask filters for maximum
usable RF power output.
The Ranger control system is adapted from the state-of-the-art Atlas Series UHF solid state
transmitter using a very simple control panel and easy to use Graphical User Interface or GUI.
It consists of a single cabinet with an Apex exciter, a single power supply and one or two PA
modules depending on the model.
Figure 1-1 at right, shows a front view of the Ranger transmitter. All Ranger models look identical
due to the use of false module covers for the 2 or 3 right-hand slots.
Table 1-1 Ranger Series™ Transmitter Models
Tx Models
PA
Modules Power Supplies
Power
before Filter Filter location
CZ500F 1 1 375W External
CZ1000F 2 1 750W External
NOTE: All power levels given in average power assuming the use of FLO technology modulation