Fixture mount gasket
Set screws
page 3 of 4
IS-609X-190813
•
Slide the slip fitter mount over the tenon bracket
•
Ensure that the power cord is not pinched when feeding through the tenon
mount
•
Make wiring connections
as shown on Page 4
Slip
fitter (Knuckle) Mounting:
•
Remove
round slip fitter
cover and loosen bolt to adjust tilt angle on fixture
•
When desired angle is reached
,
tighten
the
center to
lock the slip fitter in place. Replace cover
•
Tighten the 2 set screws on the slip fitter to 15 ft-lbs to secure
it to the tenon
