6
5000/5100 Series Digital Analog Clocks Installation and Operation Manual
Chapter 1: DAC-5000 Series Digital Analog Clocks
Rear Panel
Figure 1-2.
DAC-5008/5012/5016 Rear Panel
The rear panels of the DAC-5008/5012/5016 have two spring-loaded
speaker-type connectors (one red, one black) to accept the Primary
Reference input (i.e. SMPTE Serial Timecode or Impulse Drive
signals).
A standard AC connector for the power feed of the unit can be found in
the recessed area running across the middle of the rear panel.
Spring Loaded
“Speaker-Type”
Connectors (red
and black)
Push-Buttons:
CW, CCW,
MANUAL SET
DIP Switches
Clock Modes
(factory set)
AC
Connector
(plug)
115/230 VAC 10%250/60Hz
25VA Max
+
OPERATION MODE
DAC-5012
DAC-5016
230 VAC
115 VAC
LINE VOLTAGE
DAC-5008
50 HZ
60 HZ
LINE FREQUENCY
12
4
35
6
OP
EN
Time Code
SMPTE
Internal
Normal
Normal
Step Seconds
Impulse
EBU
Line
Use Offset
Run On Secondary
Sweep Seconds
CW
CCW
MANUAL
SET
Multifunctional Pushbuttons
Full Instructions in Manual
