OPERATING INSTRUCTIONS
1.800.367.7670
CORPORATE HEADQUARTERS
10708 Industrial Parkway NW, Bolivar, OHIO 44612
P O W E R F U L A N S W E R S ®
WWW.HARRISBATTERY.COM
OPERATION OF TRACTION PACK
HARRIS BATTERY
COMMISSIONING
OF
TRACTION PACK
1.
Confirm that charger is correctly installed.
Check to
e
nsure that the charger has been installed at the correct
height,
and
the two screws are in place and hand tight.
2.
Confirm that Batteries are wired correctly.
Check that
all
the series connections ha
ve
been installed correctly
,
s
tarting
with the top batter
ies and finishing with
the bottom batter
ies
.
3.
Confirm the Torque of the connections.
Check the torque of each nut on the stud terminals, beginning with
the
positive terminal of the top right battery working clockwise to the
top
left batteries negative terminal. The torque should be no more/or
less
than 8 foot pounds at each connection.
4.
Confirm charger operation and complete full charge cycle.
The charger will be checked for proper operation by plugging the
charger into AC power and charging the discharged TRACTION PACK.
Cycle Service Life in Relation to Depth of Discharge
CAUTION
REVIEW AND ADHERE TO ALL SAFETY GUIDELINES
Batteries with this
symbol can be recycled.
Do not mix battery
disposal with
other industrial or
household waste.
Shield eyes. Explosive gasses
can cause blindness or injury.
Do not expose batteries to flames or sparks as it may
cause an explosion. No Sparks, Flames, Smoking when
working around batteries.
Sulfuric acid can
cause blindness or
severe burns.
Keep away
from children.
Read instructions. Assign battery and charger care to
properly trained personnel.
Maintenance-free Sealed technology - Do not attempt
to remove cover from batteries, or add water.
• Turn Machine off.
• The charger in your TRACTION PACK is fully automatic. Simply plug the
charger into a standard 110 volt power outlet and connect the battery
plug into the charger. Ensure charger indicator lights are on.
• When machine is not in use, always plug in charger to utilize
Opportunity Charging capability of the TRACTION PACK.
• To stop the charger anytime during the charging process, unplug
charger.
• Ensure a completed charge cycle occurs at least once every 24 hours.
• Batteries should not be discharged to more than 80% DOD.
SERVICE & SUPPORT
Contact your local representative for further assistance.
For more information contact Harris Battery at 1-800-367-7670.
Legal Disclaimer:
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. Harris Battery Company Inc. accepts
no liability for any loss which may be suffered by any person who relies wholly or in part upon any description, photograph or statement contained herein.
Specifications may vary from actual product.