Harrie Leenders Cylon, Инструкция по установке, использованию и техническому обслуживанию

Страница: 15 / 26

Harrie Leenders Cylon ­ Instructions for Installation, Use and Maintenance
15
How to use the Cylon
1. Fully open the air­control slide by moving it towards the front of the
stove. This is the kindling position.
3. When the stove has been burning properly for a while, add a few
more solid logs. (First open the aeration slide.)
Stack lightly. The amount (not more than 3 logs) depends on the heat
required.
4. For a glowing mass of charcoal, you may close the aeration slide
even further. You will then enjoy the heat longer. If you want to let the
fire die down, open the aeration slide all the way. The remaining wood
will then burn up quicker.
5. A quietly burning fire is obtained by closing the air slide even more
by pushing it inwards. This will reduce the draught in the Cylon. For a
glowing mass of charcoal, you may close the air slide even further. The
heat will then last longer. When you want to let the fire die down, you
must open the air slide more.
2. Put the stove in the loading position (by turning it slightly to the left
until you hear the click that locks it). Then open the stove.
Place 3 fairly thick logs on the bottom of the stove. Stack some kindling
wood on top of them. Stack lightly.
Light the kindling wood up in the stove with a firelighter or some paper.
Allow some time for the stove to heat up in order to ensure a proper
draught and a good fire under the more solid logs to be added.