Harper Verti-Cutter VC-60, Руководство оператора

Страница: 9 / 44

VERTI-CUTTER
R
R
Safety Guidelines
SAFETY WARNING!
Use genuine factory parts or parts with
equivalent characteristics, including type,
strength and material. Failure to do so
may result in product malfunction and
possible injury to the operator and/or
others.
• Replace locknuts and locking screws if
you can tighten them without feeling
considerable resistance for several
turns before they are completely tight.
Replace them with factory authorized
parts or their equivalent.
• If hardware is not secure, or if some
of the hardware is over-tightened,
equipment failure may result, posing
possible safety hazards.
• To prevent possible eye injury, always
wear SAFETY GLASSES while oper-
ating and servicing the equipment.
Guards & Shields
• Keep the equipment and attachments
in good operating condition, and keep
all safety devices in place. Replace all
worn, damaged, unusable, missing or
lost safety shields and guards before
operating the equipment.
Safety Decals
• If safety related or instructional decals
become illegible or are removed, re
place them immediately.
• If you replace parts that have such
decals attached to them, make sure
the decals are replaced with current
versions, and that the decals are on
the replacement parts before the
machine is operated again.
• New decals may be obtained from
your local Harper/Goossen Dealer.
Equipment & Controls
• Altering this equipment in any manner
which adversely affects its operation,
performance, durability, or use will void
the warranty and may cause hazard-
ous conditions.
• Know the location and function of all
controls and how to stop this equip-
ment quickly in an emergency. Read
and understand the owner’s manual
before you operate the equipment.
• Keep all nuts, bolts and screws tight to
help ensure safe operation of this
equipment.
Before Operation
• Before operating this equipment, read
and understand the Owner’s Manual.
• Do not allow children to operate this
machine.
• Never operate this machine in the
vicinity of bystanders.
• Before servicing or inspecting the
machine, make certain that the power
source is shut down, make certain all
moving parts have stopped and
disconnect the spark plug or PTO
shaft.
• Never allow hands, clothing or any
part of the body near the blades or
moving parts.
• Avoid wearing loose-fitting clothing.
Safety Guidelines
• Wear approved eye and ear protection
while operating the machine.
5