Harper TURBO VAC 60R-HD, Руководство оператора и каталог запасных частей

Страница: 20 / 57

Turbo Vac TV60R
SAFETY WARNING!
Before servicing or inspecting the Turbo
Vac, make sure the power source is shut
off and all moving parts have stopped.
SAFETY WARNING!
Disconnect the spark plug wire or the
negative battery cable to prevent the
engine from being turned on.
SAFETY WARNING!
Always wear safety glasses and protective
gloves when servicing the Turbo Vac.
Break-in Service
After the first hour of use:
• Check belts. Tighten if needed.
• Tighten set screws on bearings.
• Check nuts, bolts, and fasteners to see
that they are secure. Tighten if needed.
• Check hydraulic hoses and fittings for
leaks using the method described in
the General Safety Guidelines. Tighten
or replace if needed.
Lubrication
Ten grease zerks in the following locations
should be greased daily to reduce wear:
• Hopper door latches (2)
• Broom lift (2)
• Blower shaft (2)
• Rotor shaft (2) - one on each side
• Deck Hinge Shaft (2) - one on each side
• Replace the safety shields before
operating the Turbo Vac.
Service & Maintenance
18
Rotor Shaft Deck Hinge Shaft
* Located behind frame and
must be turned until its visible.