Harper Butler Beds, Руководство пользователя, Страница: 13 / 34

Spike Bed
11
Black wire attached to ground on lower side
of unit
All 7 wires - Blue, Yellow, and Brown are not
used.
If the transmitter does not function when turned
on for the first time, disconnect the power to
the receiver that’s mounted in the tool box.
Next press the red button on the transmitter
and release. Now PRESS and HOLD both the
red and green buttons until the LED light starts
to flash. This takes about 5 seconds. Now re -
lease both buttons. You should see a flash and
pause pattern in the LED light now. Reconnect
the power to the receiver and a 10 second win-
dow opens. Within the 10 seconds, PRESS
and HOLD the green button for 5 seconds or
until the light on the receiver is on solid (not
flashing).
Mega Fuse & Fuse Box (not included)
The 200 amp (spike bed), Mega Fuse and fuse
box should be installed on the power cable.