17
Connecting a level switch
Two level switches can be added to the unit, for devices produced in 2020 or later.
On the circuit board with the display, the "WLH" and "WLL" connections are located at the
bottom center and right. These are connected to the two contacts of the level switch.
Connect connection WLH to the level switch in the acid drum, and the connection WLL to
the level switch in the chlorine drum.
At low level detection, the corresponding pump will stop pumping and generate an alarm.
Overview chlorinator
The Salt Chlorinator uses the most advanced microcomputer technology. It is both multi-
functional and easy to operate. It includes functions such as automatic reset (self-cleaning,
limescale remover) and fault alarm.
It includes functions such as automatic reset National (self-cleaning, limescale removal)
and fault alarm. You can adjust the chlorine concentration according to your needs, to
achieve the goal of efficiency and environmental friendliness.
Product differentiating facts:
Controller and chlorinator are integrated for a simple and space-saving application.
Water inlet and outlet are designed on the same axis to reduce the need for pipe
positioning.
Design for easy access to the titanium polar plate during installation and maintenance
Users can choose from different levels of chlorine production. One can adjust the level to
the needs of the pool, which is energy efficient and environmentally friendly.
The chlorinator contains a salt meter and alarms in case of malfunction.
The chlorinator contains water temperature protection (10 ° to 40 ° ). This can significantly
increase the service life of the device.
There is a water level detection. The chlorinator will only function if water is effectively
detected.
When turned on, the unit will take over the last observed settings.
Содержание Hydrolyse EC20
Страница 1: ......
