Harmopool Harmo POWERPACK Series, Инструкция по эксплуатации, Страница: 3 / 15

3
Introduction
Read the manual carefully before you open or maintain the heat pump. The manufacturer of this product will
not be held responsible for injuries or damage to the unit, as a result of improper installation, debugging or
unnecessary maintenance. It is essential that the instructions of this manual are followed at all times.
Qualified personnel must install the heat pump.
○ Only a qualified installer, center, personnel or an authorized dealer, should repair the heat pump.
○ Maintenance and operation must be carried out according to the recommended time and frequency, as
mentioned in this manual.
○ Use original standard spare parts only. Failure to comply with these recommendations will you’re your
warranty.
Characteristics
○ Durable: the heat exchanger is made of PVC & Titanium, which can withstand prolonged exposure to
water.
○ Easy operation: the heat pump is very easy to use: turn the heat pump on and set the desired water
temperature.
○ Silent operation: the intelligent LCD display allows you to set the perfect temperature.
○ Low cost: the operational cost is very low compared to the high performance of this heat pump.
Safety instructions
○ Place the heat pump at a safe distance. Never place the pump within a radius of 350 cm from the pool.
○ The heat pump can be mounted with an RCD safety plug.
○ Put the RDC plug directly and solely into an earthed socket. Never use an extension cord or similar.
○ Check the voltage on the plug to the power at the socket. Only use an earthed socket.
○ Always check that the safety plug is working properly to ensure safety. Never remove the safety plug.
○ Place the pump and plug in a dry location. The heat pump is splash proof.
○ The failure to comply with these instructions could result in serious injuries.
○ Important!
Gas: Please verify the nameplate of the heat pump which mentions the gas. In case of R32 gas , measures for
explosion risk need to be taken: It is forbidden to hold an open flame (cigarette, lighter), in the vicinity of the
heat pump. It is forbidden to install the heat pump in the vicinity of a heat source.