water, and close the lid. Alternatively, the kettle may be filled
through the spout. The water level should not exceed MAX marks
or sit below MIN level. Very small amount of water will cause the
kettle switching off before the water boils.
NOTE: Do not fill the water over the maximum level, as water
may spill out of the spout when boiling. Ensure that the lid is
firmly in place before plugging the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the
On/Off
switch
, the indicator will light up. Then the kettle will start to boil
the water, once the water has boiled the kettle will turn off
automatically. You can turn off the power by lifting the
On/Off
switch
at any moment during operation. If you want to boil water
again, only press down the
On/Off switch
to restart the kettle.
NOTE: Ensure that the On/Off switch is free of obstructions
and that the lid is firmly closed. The kettle will not turn off if
the switch is constrained or the lid is open
.
5. Lift the kettle from the power base and then pour the water.
NOTE: Be careful when pouring the water from your kettle as
boiling water may result in scald. Also, do not open the lid
while the water in the kettle is hot.
6. The kettle will not re-boil until the
On/Off switch
is pressed
down again. The kettle may be stored on the power base when not
in use.
NOTE: Always disconnect the power supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the
boil-dry protection will automatically switch off the power. If this
occurs, allow the kettle to cool before filling with cold water to
reboil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it
down completely before cleaning.
1. Never immerse the kettle, power cord or power base in water, or
allow moisture to contact with these parts.
2. Wipe the external body with a damp cloth or cleaner, never use
abrasive cleaner.
3. Remember to clean the filter at intervals. For easier cleaning,
detach the filter and then replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive
cleaners to clean the external surface of the kettle to prevent
the gloss loss.
