Harmony V7, Инструкция пользователя, Страница: 34 / 101

33
simultaneously release the extra belt length until seat
belt is taught and has no slack ❺.
6. The locked seat belt retractor will not allow you to
add any length to the belt until you unbuckle the seat
belt.
For more information on how to tighten the belt for
your seat belt system, see your vehicle owner’s manual.
7. Secure the top of the child restraint using the Top
Tether Strap (see “Using Top Tether”, pg. 25).
INSTALLATION SAFETY CHECK
Perform this test EVERY TIME you drive with your child
and whenever you readjust the child restraint as your
child grows:
Rock the child restraint back and
forth and side to side to make sure
the UAS or vehicle seat belt does not
lengthen or loosen, and the child
restraint does not move easily ❶.
The back of the child restraint
(connection point) should not move
more than 2.5 cm (1 inch) in any direction.
If the child restraint is loose or not properly secured,
repeat procedure OR find another location for the child
restraint (see “Choosing an appropriate vehicle seat
location”, pg. 12).
❶