INSTALLING BUMPER BAR
4
CANOPY
Attach the front bumper by aligning anchors with the slots
at the ends of the armrests.
! WARNING:
NEVER
use the bumper bar to lift the
pushchair up with the child sitting in it.
FITTING FRONT WHEELS
Install front wheels on
front bars as shown (x2).
A ‘click’ should be heard
in ensure wheel is fully installed. Press release button to
remove each wheel.
Open the canopy by pulling the
canopy out.
Pull back canopy to close.
To use sun visor, pull out from front
of canopy.
To open canopy vent section, locate
clip on back of canopy and fasten.
RECLINE
ADJUSTING HARNESS
Locate the recline adjustment belt behind the backrest.
Press on clips and release slack to lower the backrest.
Place child in the pushchair seat
and adjust height to shoulder level.
With the crotch strap between the
child’s legs, secure both buckles as
shown
❶
.
ADJUST
the harness snugly around
your child. Slide the adjusters on
both the waist and shoulder straps
to tighten or loosen the harness
system
❷
.
Pull on both straps to raise the backrest.
TO LOC
K
APPLYING/RELEASING BRAKES
TO UNLOC
K
Step down on the brake lever
to lock rear wheels. Lift up
lever to unlock rear wheels.
! WARNING:
Apply the
brakes each time you park
the pushchair.
FOOTREST
To raise footrest, lift up until
it is locked into place.
To lower footrest, squeeze
button from each corner
under footrest and lower.
! WARNING:
The footrest
should
NEVER
be used as a
step when getting into/out
of the pushchair.
❶
❷
ENSURE THE BACKREST IS FULLY RECLINED FOR INFANTS
0 - 6 MONTHS OR UNTIL THEY CAN SIT UPRIGHT
UNASSISTED.
WARNING!
!
