Cleaning and Maintenance:
Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.
1. Wipe off the soleplate with a damp cloth and a non-abrasive(liquid)cleaner.
2. If the fiber is adhered to the soleplate, use a damp cloth with vinegar to wipe off the soleplate.
3. Never use strong acid or alkali in order to avoid damaging the soleplate.
4. If the scale blocks the steam hole, please remove the scale with toothpick; do not damage the
surface of soleplate.
5. Stand the iron on the end and let it cool down sufficiently, and meantime pour any remaining
water out of the box, set the steam regulator to positon"0".
Simple Repair Methods:
Failure
Possible reasons
Measurement
Not enough heat or too
heat
Rotate thermostat dial button
improperly
Correct thermostat dial button in
position
No steam produces
Check if the thermostat dial has been
set towards the steam range
Adjust the regulator towards the
steam range
Check if the steam regulator has been
set towards the steam position
Set steam regulator towards the
steam range
No or too little water in box
Fill water into the box
Leaking water from
soleplate
Set the thermostat dial out of steam
range
Set the thermostat dial as per steam
range
The heat is still not enough
Open steam button only after the
indicator light goes off
The water is over than max position
Pour out the remaining water
Little steam
Check if the steam regulator is in
proper location
Set the steam regulator to the proper
location
Steam hole or box is blocked
Clean hole with distilled water
Too little water in the box
Fill water into the box
No spraying
No enough pressure or air inside
Press the spray nozzle by hand, and
push the spray button several times
continuously
No or little water in the box
Fill water into the box
After the above-mentioned methods to repair iron, if it still cannot come to work normally. please sent to
our special repair agent for repair.
