22
INSTALLATION - BOOSTER SEAT
DUE TO VARYING ANGLES OF VEHICLE SEAT BELT
RETRACTORS, EXCESS SLACK IN THE VEHICLE BELT
SYSTEM MIGHT NOT BE REMOVED AUTOMATICALLY.
Once the lap and shoulder portions of the seat belt
are properly positioned and the buckle is attached,
FEED ANY REMAINING SLACK OF THE SEAT BELT
MANUALLY BACK INTO THE RETRACTOR TO TIGHTEN
THE WHOLE SYSTEM.
WARNING!
!
1.
OPTY-FIX MODELS: Rotate
the Isofix connectors from
underneath the base of the
seat 180 degrees as shown ❶.
2.
Place the booster seat flush
against a forward-facing vehicle
seat, centered between the
Isofix anchors. The vehicle
seat
MUST
be equipped with
a 3-point lap-and-shoulder belt.
Booster must be level, stable and
not rock side-to-side (see “Vehicle
seating positions”).
3.
OPTY-FIX MODELS: Gently guide
the Opty-Fix connectors against
the anchors, engaging the Isofix
connectors. An audible “click”
will be heard when engaged and
the indicator window will turn
GREEN
❷.
4.
Place child in the booster seat with
child’s back flat against the back of
the booster seat.
180˚
❶
❷
