Harmony Hi Lo Tilt HS, Руководство по сборке и эксплуатации

Страница: 10 / 28

8
STEP 3
Put Center Cross Braces
(Q) into their
corresponding brackets of
the two cross tubes (one
on the Head Section and
the other one on the Foot
Section), as shown in the
picture.
Insert each Clevis Pin (O)
Then, insert each Cotter
Pin (P) through the holes
of each Clevis Pin (O), as
shown in the picture.
Take out 2*Center Cross
Braces (Q), 4*Clevis
Pins(O), 4*Cotter Pins (P),
4*Bolts for Center Cross
Brace(W) from the
accessory box.
*There's only 1*Center
Cross Brace, 2*Clevis Pin,
2*Cotter Pin, 2*Bolts for
TXL Base.*
through the brackets and
holes of Center Cross
Braces (Q).
To make it Center Cross
Braces (Q) securely
locked, insert the Bolts for
Center Cross Braces (W)
through the holes on it.