Harmonic PWRLink II 4100S Series, Руководство по эксплуатации продукта

Страница: 5 / 50

PWRLink™ II 4100S Series Optical Transmitter Product Manual Rev A (3/06) 1–1
1
Overview
1.1 About This Manual
This instruction manual is a complete guide to installation, configuration and
operation of the PWRLink™ II 4100S Series Optical Transmitter (PWL 4100S).
The models that are covered by this manual are listed in Appendix A, Section
A.8.
• Chapter 1 provides a description of the PWL 4100S.
• Chapter 2 describes the installation procedure.
• Chapter 3 introduces the user interfaces.
• Chapter 4 describes how to set up and configure the transmitter.
• Chapter 5 outlines maintenance procedures.
• Chapter 6 provides instructions on what to do in the event of problems.
• Appendix A provides complete technical specifications.
• Appendix B shows additional user interface details.
• Appendix C provides additional details about using modulated carriers.
• Appendix D provides a list of Harmonic’s offices.
1.2 Description
The PWL 4100S transmitter is a compact plug-in module designed for use in
the Harmonic HLP 4200 equipment platform. An HMC 4001 module carrier is
needed to mount the transmitter in the platform. Harmonic has optimized the
PWRLink II family of transmitter modules for high-performance transmission
of RF broadband information over optical fiber networks.
The PWL 4100S has the following key features:
• Transmission bandwidth from 45 to 1003 MHz
• Optical performance with 80 NTSC (System M) analog channels plus
additional digital loading
• Internal monitoring and control using 32-bit microprocessor
• Local control of operating parameters—provided by the HLP 4200
platform
• Remote control and monitoring—provided by NETWatch Site Controller