Chapter 7 Device Configuring Using EMS
Device Management
© 2012 Harmonic Inc.
147
ProView 7000 v.2.6, Rev. E
7.10.5
Log-In / Log-Out Control of the Device
A connected ProView 7000™ device needs to be logged-in before enabled for EMS
management. The EMS user management is set at two levels:
■
Monitoring level, where the user can view the device parameters and status.
■
Configuring level, where the user is enabled to monitor and configure the device
parameters.
Logging in is password protected. Refer to
7.11.4 Device Users’ Access Properties
for setting
up and changing the device access password and to
7.10.9 Restoring the Factory/Default
for restoring factory passwords. Logging out leaves the device
connected to the EMS, yet disables access to the device.
7.10.6
Setting Up/Changing the Device Log-in Password
Setting up or changing the device log-in password is enabled for Configuring level users. For
details on password set-up, refer to
7.11.4 Device Users’ Access Properties
7.10.7
Managing Presets
Use the Manage Presets menu to display the Presets Management dialog and manage
multiple configuration files. If you use several satellites, you can create a preset file for each
satellite configuration and activate the appropriate preset when you switch transponders.
You can create up to 10 presets. You can download preset files to your management PC and
upload them to other ProView 7000™s with the same hardware configuration, firmware
version and licenses. See Figure 7–35.
Figure 7–35: Presets Management dialog
