Chapter 2 Installing the ProStream 9100
© 2016 Harmonic Inc. All rights reserved.
27
ProStream 9100 Release 17.5, Rev A
Installing the Device in a Rack
Attaching the Rack Rails
Attach the side-mount rack rails to the rack to hold the device in place.
illustrates the
parts of the rack rails.
Figure 2–1: Rack Rails
To attach the rack rails to the rack:
1.
If necessary, place a Tinnerman™ speed nut—with the nut on the outside of the rack—over the
holes to which you want to mount the rails.
NOTE:
Each of the four rack posts requires two speed nuts.
2.
Position the rack rails so the shelves are facing the inside of the rack.
3.
Using the #10 screws provided with the device, screw the mounts into the speed nuts from
the inside of the rack using the rack-mount holes that line up with the holes on the rack posts.
illustrates attaching the rails.
Figure 2–2: Attaching the Rails to the Rack
Содержание ProStream 9100
Страница 1: ...ProStream 9100 RELEASE 17 5 Installation Guide Rev A...
Страница 79: ...2016 Harmonic Inc All rights reserved...