harmoni HSBC21, Инструкция по эксплуатации и монтажу, Страница: 8 / 20

8
To modify one of the pre-installed programmes:
STEP 1 - You will need to establish the set temperature of the COMFORT/ECO/ANTI-FROST modes first. Please
press and hold the
button for 3 seconds. Press the buttons to either increase or decrease the
temperature respectively within the pre-set COMFORT temperature range (see tables on page 6). Press
the button to confirm and you will then move to the ECO temperature settings. Use the but-
tons to either increase or decrease the temperature respectively within the pre-set ECO temperature range.
Press the
button to confirm and you will then move to the ANTI-FROST temperature settings. Use
the buttons to either increase or decrease the temperature respectively and press the button
to confirm.
STEP 2 - The days of the week will be modified next. Use the buttons to select the chosen days and
press the button to select the days you want to modify. After day 7, press the button to proceed to
the next step.
STEP 3 - Then you will move onto setting the mode for each hour, of the day which will begin at 0h (midnight).
You will need to go through each hour and select a mode for each hour.
Select the mode by pressing the button - press once for COMFORT, press twice for ECO and press three
times for ANTI-FROST. To move onto the next hour, use the buttons.
ANTI-FROST
COMFORT ECO
Once all 24 hours of the day have been assigned a mode (after 23h), press the button to save your settings
and return to the main screen. To send the adjustments to the radiator, towel rail or water heater, press the
button with the remote control pointing at the product.