Installing the Lift With Swing Away Option
Measure from Hitch Bar to ground
4-12"
12-14"
14-16"
16-17"
Class I Hitch Adapter may NOT be used
when installing a Swing Away.
To prepare your lift for installation with a Swing Away you muct connect the lift to the Swing Away
and Hitch Adapter provided. Proper positioning is determined by the height of the vehicle hitch.
1. Measure the distance from the bottom of the hitch reciever on the vehicle to the ground.
2. Refer to Figure 1 below to determine correct placement of the hitch adapter.
3. Connect hitch post to lift.
Once you have determined correct configuration, connect the
Swing Away to the Hitch Adapter following the diagram to the
right using hardware supplied (1/2 - 13 x 3-1/2” HHCS and
lock nuts).
Position the folded lift to the rear of the vehicle with the motor
box folded away from the vehicle. With assistance, carefully
lift the unit up to the Swing Away and attach it using the 1/2”
bolt, washers and lock nut provided.
Figure 1
*Drawing depicts Class III application. Class II installation is identical.
