Outside Vehicle Lifts:
Owner’s Manual
06DEC19 | 630-00105 REV A
9
OUTSIDE VEHICLE LIFTS:
SECTION 3
OPERATION
SECURING THE MOBILITY
DEVICE
Depending on your lift model and the type of
securement device it uses, you may wish to raise the
platform halfway by using the UP toggle switch. If you
raise the platform, you won’t have to bend over while
you attach straps or flip the chair’s armrest out of the
way of the hold-down arm. See Figure 3-4.
Figure 3-4
Notes for AL015, AL100,
AL100HD and AL160 Models
On some scooters, it may be necessary to temporarily
move the steering tiller forward to clear the hold-
down foot as it lowers into the lock-down position.
RAISING THE LIFT
1.
When the mobility device is secure, use the UP
toggle switch to continue raising the lift.
2.
Stop raising the lift when it reaches the top
of travel and when you hear the clicking or
ratcheting sound.
3.
Remove the key. See Figure 3-5.
Figure 3-5
Some scooters have pneumatic (air-inflated) tires. If
your scooter has this type of tire, be sure the tires are
properly inflated. Improper inflation will change the
deck height of the scooter and therefore change the
amount of clamping force the hold-down arm places
on the scooter. The scooter can fall off the lift if not
properly secured.
NOTICE
Ensure that the securement system (whether it’s
a hold-down arm, hold-down foot or straps) has
enough tension to secure the device.
NOTICE
x2
