Compact Stagebox
9
Document generated: 12.02.13
SW V4.1
GP input examples:
i
LED
Ext.
Supply
5...24 VDC
Negative Common, Ext. Supply
Negative Common, Int. Supply
Positive Common, Ext. Supply
Positive Common, Int. Supply
Ext.
GND
Desk
i
LED
Int.
Supply (VCC)
Desk
Ext.
GND
i
LED
Ext.
Supply
5...24 VDC
Desk
Int.
GND
Int.
GND
i
LED
Int.
Supply (VCC)
Desk
Control Outputs
The control outputs (GPO Xa/b) are completely independent and electri-
cally isolated relay contacts, closed if active. They may be used either with
the in5 V DC supply voltage (VCC) and the internal ground, or with
external voltages within the limits given in the table below. So when using
an external supply, it is irrelevant wheter the load is connected b or
GND and one of the relay contacts, regardless of the polarity of the external
supply voltage (refer to the circuit examples below).
GPO Relay Contact Rating (max. Values)
Switching Power
62.5 VA / 30 W
Switching Voltage
50 V AC or DC
Switching Current
1 A
Contact Resistance
max. 100 m
W
at 6 V DC / 1 A
The +5 V DC supply voltage and the ground (GND) terminals, together with
the relay contacts, may be used to generate an output signal. Using an external
supply together with the relay contacts is possible as well.
!
The total current supplied by all VCC (+5 V DC) pins of the
GPI / GPO
con-
nectors must not exceed 400 mA.
GPO
1-8 (25-pin D-type, female, UNC 4-40 thread)
Solder/Crimp View
(or Socket View)
1
14
25
13
Pin Signal ‘GPO 1-8’
Pin Signal ‘GPO 1-8’
1
GPO 1a
14
GPO 1b
2
GPO 2a
15
GPO 2b
3
GPO 3a
16
GPO 3b
4
GPO 4a
17
GPO 4b
5
GPO 5a
18
GPO 5b
6
GPO 6a
19
GPO 6b
7
GPO 7a
20
GPO 7b
8
GPO 8a
21
GPO 8b
9-13 GND (0 V)
22-25 VCC (+5 V / 600 mA max.)
GP output examples:
Ext. Supply
Int. Supply
Ext.
GND
Desk
Ext.
Supply
Load
(Lamp)
Int.
GND
Desk
Int.
Supply (VCC)
Load
(Lamp)
